Combined AC/Dataline surge protector for LED lighting system Class 2

MLPCH2-230L-V/DL
Part Number 838223
MLPCH2-230L-V/DL
  • Type 2 (or 3) surge protector for Class 2 LED Lighting
  • Combined AC/Dataline surge protection
  • DALI, DMX, RS485, 0-10V data lines compliance
  • Optimized coordination with driver
  • Compact dimensions
  • Screw connection
  • Max. discharge current 10 kA
  • Certifié IEC 61643-11 and IEC 61643-21
Contact Us
The MLPCHx-V/DL surge protectors have been designed to protect single-phase DALI-powered equipment. Designed for optimum coordination with the driver, the range offers an excellent performance ratio. The products can be used as Type 2 + 3, thanks to their very compact design and their maximum discharge capacity of 10 kA per pole. Connection is via opposing screw terminals (MLPCHx-230L-V). The products comply with IEC 61643-11 and IEC 61643-21.
Network
 230 V single-phase
AC system
 TT-TN
Max. Data operating voltage
 Uc 28 Vdc
Max. AC operating voltage
 Uc 320 Vac
Max. load current
@25°C
 IL 2.5 A
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
 UT 335 Vac withstand
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
 UT 440 Vac disconnection
Residual Current
Leakage current to Ground
 Ipe None
Nominal discharge current
15 x 8/20 µs impulses
 In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 10 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc 10 kV
Protection mode(s)
 Differential Mode
Protection level
@ In (8/20 µs)
 Up L/L 50 V
Protection level L/N
@ In (8/20µs)
 Up L/N 1.5 kV
Nominal discharge current
C2 Category
 In 5 kA
Admissible short-circuit current
 Isccr 10 000 A
Technology
 MOV+GDT
Connection to Network
 By screw terminal: 1.5mm² max.
Mounting
 On plate
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Failsafe mode
 Disconnection, Green Led OFF and power cut off
Disconnection indicator
 LED green OFF and AC network cut-off
Dimensions
 See diagram
Weight
 0.056 kg
Standards compliance
 IEC 61643-11 / EN 61643-11 / IEC 61643-21 / EN 61643-21 / UL1449 ed.5
Certification
 KEMA