AC surge protector for LED Lighting system Class 2

MLPC2-277L-V
Part Number 832321
MLPC2-277L-V
  • Type 2 (or 3) surge protectors for LED
  • Class 2
  • Very compact
  • Plate mounting
  • Spring terminal connection
  • Status indicator
  • Disconnection AC end of life
  • EN 61643-11 compliance
Contact Us
SPD type
2+3
Network
 120-277 V Single-phase
AC system
 TT-TN
Max. AC operating voltage
Uc 320 Vac
Max. load current
@25°C
 IL 5 A
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
 UT 335 Vac withstand
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
 UT 440 Vac disconnection
Residual Current
Leakage current to Ground
 Ipe None
Nominal discharge current
15 x 8/20 µs impulses
 In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 10 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total 20 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc 10 kV
Withstand on overvoltages IEEE C62.41.1
 10 kV / 10 kA
Protection level
@ In (8/20µs)
 Up 1.8 kV
Admissible short-circuit current
 Isccr 10 000 A
Electrostatic protection mode
 N/Functional Earth
Connection to Network
 2 screw terminals opposite side in/out - wire 2.5mm² max.
Mounting
 On plate
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Failsafe mode
 Disconnection and AC line cut-off
Disconnection indicator
 LED green OFF and AC network cut-off
Voltage/operating indicator
 Green Led ON
Dimensions
 See diagram
Standards compliance
 EN 61643-11 / IEC 61643-11
Certification
 TUV
Thermal disconnector
 Internal
Installation ground fault breaker
 Type 'S' or delayed