RJ11 surge protector for 1 telephone line

MJ6-1T-UL
Part Number 560422
MJ6-1T-UL
  • Telecom line surge protector
  • PSTN, ADSL2, VDSL
  • 1-pair + Shielded
  • Instantaneous installation
  • RJ11 connector
  • UL497A
Contact Us
The MJ6-1T/D surge protector is designed to protect sensitive telecom terminals against lightning surges. They are equipped with standard telecom connection allowing easy and intantaneous maintenance. Compatible with RJ11 connector it protects one PSTN or ADSL2 line Wall mounting
Select another reference:
Network
 Telephone Line, ADSL2, VDSL2, 1 pair
Nominal line voltage
 Un 150 Vdc
Max. AC operating voltage
Uc 150 Vac
Max. DC operating voltage
 Uc 170 Vdc
Max. frequency
 f max. > 10 MHz
Max. data rate
 30 Mbps
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 20 kA
Line inductance
 No
Protection level
@ In (8/20µs)
 Up 220 V
Protection level
@ In (8/20 µs)
 Up L/L 220 V
Protection level
@ In (8/20 µs)
 Up L/PE 20 V
Protection level L/N
@ In (8/20µs)
 Up L/N 220 V
Protection level L/PE
@ In (8/20µs)
 Up L/PE 220 V
Line/Line Nominal discharge current
C2 Category
In L/L 2500 A
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
 In L/PE 2500 A
Line resistance
 < 4.7 Ohm
Network type
 Data Communication
Technology
 GDT+Clamping diode
SPD configuration
 1-pair+shielded
Connection to Network
 RJ11 connector female input/output
Format
 RJ11 Connector
Mounting
 Mounting flange,Screw lug
Housing material
 Aluminium
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Outdoor application
 No
Failsafe mode
 Short-circuit
Disconnection indicator
 Transmission interrupt
Spare module(s)
 DLAM-170
Remote signaling of disconnection
 No
Pinout
 1-pair (3-4)
Dimensions
 See diagram
Standards compliance
 IEC 61643-21 / EN 61643-21 / UL497A