1-pair DIN rail plug-in Data surge protector

DLAW-12D3
Part Number: 640802
DLAW-12D3
  • Din rail plug-in surge protector
  • 1-pair
  • Un: 12 V
  • Shield wire protection
  • Plug-out with line cut-off
  • IEC 61643-21 compliance
  • UL497A
Contact Us
DLA surge protectors are designed to protect, against surge voltages due to lightning, terminals equipment connected to industrial buses, telecom lines or datalines. These surge protectors must be installed on symmetrical DIN rail and are available for most of the transmission lines: line voltage from 6 to 170V, bitrate up to 10 Mbit/s. D3 types aim to realize fine protection and D2 types is specific for floating applicaiton. These products are 1-pair surge protectors with removable module for easy maintenance.
Select another reference:
Network RS232, RS485
Nominal line voltage Un 12 V
Max. DC operating voltage Uc 15 Vdc
Max. frequency f max. > 3 MHz
Max. discharge current Imax 20 kA
Line inductance No
Protection level Up 30 V
Protection level Up 20 V
Line/Line Nominal discharge current In L/L 5 kA
Line/Ground Nominal discharge current In L/PE 5 kA
Line resistance < 4.7 Ohm
Technology GDT+Clamping diode
SPD configuration 1-pair+shielded
Connection to Network By screw terminal: cross section 0.5-2.5mm²
Format Plug-in DIN box
Mounting Symmetrical rail 35 mm (EN 60715)
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Short-circuit - transmision cut-off - fault mode 2
With line cut-off in case of removal plug-in module Yes
Spare module(s) DLAM-12D3
Dimensions See diagram
Standards compliance IEC 61643-21 / EN 61643-21 / UL497A