Type 2+3 PV surge protector - VG and CTC Technology

DPVN40CVGS-21Y-1200
Part Number 65122102
DPVN40CVGS-21Y-1200

NEW CITEL PV SPD

  • Type 2+3 surge protector for Photovoltaic
  • CTC Technology
  • VG Technology
  • Discharge currents Imax/Itotal: 40/60 kA (8/20µs)
  • Common/Differential mode protection
  • Remote signaling
  • IEC 61643-31, EN 61643-31, EN 50539-11, UL1449 ed.5 compliance
  • Certified EN 61643-31 and IEC 61643-31
Contact Us
The DPVN40VG is CITEL's new series of type 2+3 SPDs for photovoltaic applications. The development of these SPDs is based on two technologies, patented exclusively by CITEL. The VG Technology guarantees total absence of leakage current and maximum reliability. Using CTC Technology, the DPVN40VG incorporates a thermosensitive separation point placed at the center of the SPD, guaranteeing the safest disconnection on the market. The products are designed for DIN rail mounting. Compact and equipped with a fault indicator, these products are easy to install and maintain.
SPD type
IEC

2+3
Network

PV 1000 Vdc
Nominal PV voltage
 Uocstc

1000 Vdc
Max. PV operating voltage
 Ucpv

1200 Vdc
Residual Current
Leakage current to Ground
 Ipe

None
PV Permanent Operating current
Current consumption at Ucpv
 Icpv

None
Follow current
If

None
Nominal discharge current
15 x 8/20 µs impulses
 In

20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax

40 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total

60 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc

6 kV
Current withstand short circuit PV
 Iscpv

15 000 A
Connection mode(s)

+/-/PE
Protection mode(s)

Common/Differential mode
Protection level +/-
@ In (8/20µs)
 Up

4.3 kV
Protection level +/PE (-/PE)
@ In (8/20µs)
 Up

4.3 kV
Protection level at 5 kA
@ 5 kA (8/20µs)
 Up

3,5 kV
Protection level at Uoc
@ Uoc (1.2/50 µs)
 Up

3,1 kV
Technology

VG Technology (MOV+GSG)
Connection to Network

By screw terminals: 2.5-25mm² (35mm²) / by bus
Format

Compact monobloc box
Plugable

No
Mounting

Symmetrical rail 35 mm (EN 60715)
Housing material

Thermoplastic UL94 V-0
Operating temperature
 Tu

-40/+85°C
Protection rating

IP20
Outdoor application

No
Failsafe mode

All pole disconnection from PV network
Disconnection indicator

1 mechanical indicator - Red/Green
Remote signaling of disconnection

Output on changeover contact
Max. Voltage/Current for remote signaling

250 V / 0.5 A (AC) / 30 V / 3 A (DC)
Dimensions

See diagram - 2.5TE (EN43880)
Weight

0.285 kg
Standards compliance

IEC 61643-31 / EN 61643-31 / EN 50539-11 / UL1449 ed.5
Certification

KEMA
Thermal disconnector

CTC Technology integrated
Back-up protection device

Without