Coaxial surge protector for video transmission networks
CNP06 F/MF
Part Number: 632601
- Coaxial surge protector
- Multiples connectors
- Low insertion loss
- Easy installation$
CNP surge protectors are designed to protect sensitive equipment, connected to coaxial lines as computer networks, video-transmission, against transient surge voltages and disturbances created by lightning.
Select another reference:
Network | coaxial DC-100 MHz | |
Nominal line voltage | Un | 5 V |
Max. DC operating voltage | Uc | 10 V |
Max. frequency | f max. | DC-100 MHz |
Insertion loss | ≤ 0.5 dB | |
Return loss | ≥20 dB | |
Impedance | 50/75 ohms | |
VSWR | < 1.3:1 | |
Max. load current | IL | 0.5 A |
Operating current | Ic | None |
Max. discharge current | Imax | 20 kA |
Protection mode(s) | Common mode | |
Protection level | Up | 20 V |
Protection level L/N | Up L/N | 20 V |
Protection level L/PE | Up L/PE | 20 V |
Impulse current | Iimp | 2.5 kA |
Nominal discharge current | In | 5 kA |
Max Power | 4 W | |
DC Pass | ZERTZAERTZERTZER | False |
Technology | GDT + Diode | |
Connection to Network | F connector male/female | |
Format | Insulating box | |
Mounting | On plate | |
Housing material | Metal+plastic | |
Operating temperature | Tu | -40/+85°C |
Protection rating | IP20 | |
Failsafe mode | Short-circuit - transmision cut-off - fault mode 2 | |
Disconnection indicator | Transmission interrupt | |
Dimensions | See diagram |
Standards compliance | IEC 61643-21 / EN 61643-21 / UL497C / UL497E |