19'' patch panel surge protector for high-speed network
RAK16-POE-A
Part Number: 6372
  • 19'' patch panel surge protector for POE-A
  • mounting 'stand-alone'
  • 16 ports
  • In/Out front : RJ45 -Maintenance possible per port
  • Secondary Protection
  • Conforme UL497B

The RAK series of rack mount and wall mount standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BaseT Ethernet, Cat5, Cat6, PoE and most other communication interfaces.



Network
POE mode A, Gigabit Ethernet, POE Plus
Nominal line voltage
48 Vdc
Max. DC operating voltage
60 Vdc
Max. load current
750 mA
Max. data rate
1000 Mbps
Max. frequency
> 100 MHz
Insertion loss
< 1 dB
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
80 V
Max. shunt capacitance < 25 pF (ligne ethernet)
Discharge current
at 10/1000µs impulse current
50 A
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category
250 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category
250 A
Technology Diode écrêtage
SPD configuration 16 ports of 8 wires
Connection to Network RJ45 female intput/output
Format
Rack 19''
Mounting
Baie 19''
Housing material Aluminium
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
False
Failsafe behavior Short-circuit
Disconnection indicator Transmission interrupt
Spare module(s)
1-port removable circuit
Remote signaling of disconnection
no
Pin outs (1-2)(3-6)(4-5)(7-8)
Dimensions
See diagram
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3at