Stopped production - REPLACED BY: DLATS1-12D3 (6417021)

DLATS-12D3
Part Number 6414021
DLATS-12D3
  • Discover our latest innovation : the DLAWTS1-12D3
  • 1-pair dataline/telecom surge protection
  • Din rail mounting
  • Plug-in module
  • Local and Remote signaling of SPD status (functional/failure)
  • 1 control module (white) + SPD modules (yellow): 24 SPDs maximum by control module
  • Maximum dsicharge current Imax: 20kA
  • Compliance with IEC/EN 61643-21,UL 497A, GB 188002.21

The DLATS is a range of pluggable dataline surge protector with remote fault signaling feature which allows the user to detect remotely a faulty surge protector. The product is made with a monitoring module which controls, through a wire bus, the status of the surge protective modules. In case of operation of an internal disconnection mechanism of the one or several surge protective modules, the monitoring module will send the information through the closing of a electrical contact. In the same time, the front LED of the defective surge protective modules, normally green color, will turn red. Thanks to the pluggable construction, the defective module will be easely replace by a new one. One monitoring module, powered by 24 Vdc, could manage up to 24 surge protective modules. The surge protective modules are based of Gas tube and fast clamping diodes association for high discharge capabilty and low clamping level. The end of lile of the SPD will create a line disconnection (Fault Mode 3 following IEC61643-21).

Select another reference:

Network

RS232, RS485

Nominal line voltage
Un

12 V

Max. DC operating voltage
Uc

15 Vdc

Max. frequency
f max.

3 MHz

Insertion loss

< 1 dB

Max. load current @25°C
IL

300 mA

Max. discharge current
max. withstand @ 8/20 µs by pole
Imax

20 kA

Line inductance (± 10 %)

non

Protection mode(s)

Common/Differential mode

Protection Level
C3 (10/1000μs), 300 applications@10 A, X-X (Line/Line)
Up

30 V

Protection level
C3 (10/1000μs), 300 applications@10 A, X-C (Line/Earth)
Up

30 V

Impulse current
2 x 10/350µs Test - D1 Category
Iimp

5 kA

Nominal discharge current
C2 Category
In

5 kA

Average wattage

0.3 W maximum

Technology

GDT+TVS diode

Connection to Network

By screw terminal: cross section 0.4-1.5mm² or spring terminal (DLATS-xxx/R)

Format

Plug-in DIN box

Mounting

Symmetrical rail 35 mm (EN 60715)

Housing material

Thermoplastic UL94 V-0

Operating temperature
Tu

-40/+85°C

Protection rating

IP20

Failsafe mode

Short-circuit - transmision cut-off - fault mode 3

Operating indicator

Green / Red

Spare module(s)

DLAMTS-12D3

Remote signaling of disconnection

Yes

Connection bus

SPD connection/control module by bus: bus 1+4 (1control module+4 SPD), bus 1+9, bus 1+24

Dimensions

See diagram

Weight

0.065 kg

Standards compliance

IEC 61643-21 / EN 61643-21 / UL497B / GBT 18802.21