❮ ❯ ×

Stopped production - REPLACED BY: DLATS1-12D3/R (6417024)

Part Number: 6414024
DLATS-12D3/R
  • Discover our latest innovation : the DLAWTS1-12D3/R
  • 1-pair dataline/telecom surge protection
  • Din rail mounting
  • Plug-in module
  • Local and Remote signaling of SPD status (functional/failure)
  • 1 control module (white) + SPD modules (yellow): 24 SPDs maximum by control module
  • Maximum dsicharge current Imax: 20kA
  • Compliance with IEC/EN 61643-21,UL 497A, GB 188002.21
The DLATS is a range of pluggable dataline surge protector with remote fault signaling feature which allows the user to detect remotely a faulty surge protector. The product is made with a monitoring module which controls, through a wire bus, the status of the surge protective modules. In case of operation of an internal disconnection mechanism of the one or several surge protective modules, the monitoring module will send the information through the closing of a electrical contact. In the same time, the front LED of the defective surge protective modules, normally green color, will turn red. Thanks to the pluggable construction, the defective module will be easely replace by a new one. One monitoring module, powered by 24 Vdc, could manage up to 24 surge protective modules. The surge protective modules are based of Gas tube and fast clamping diodes association for high discharge capabilty and low clamping level. The end of lile of the SPD will create a line disconnection (Fault Mode 3 following IEC61643-21).
Select another reference:
DLATS-12D3/R

Network

RS232, RS485
Nominal line voltage
 Un

12 V
Max. DC operating voltage
 Uc

15 Vdc
Max. frequency
 f max.

3 MHz
Insertion loss

< 1 dB
Max. load current @25°C
 IL

300 mA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax

20 kA
Nominal discharge current
C2 Category
 In

5 kA
Line inductance (± 10 %)

non
Protection mode(s)

Common/Differential mode
Protection Level
C3 (10/1000μs), 300 applications@10 A, Y-Y (Line/Line)
 Up

30 V
Protection Level
C3 (10/1000μs), 300 applications@10 A, Y-C (Line/Earth)
 Up

30 V
Impulse current
2 x 10/350µs Test - D1 Category
 Iimp

5 kA
Average wattage

0.3 W maximum

Technology

GDT+TVS diode
Connection to Network

Spring terminal: cross section 0.5-2.5mm²
Format

Plug-in DIN box
Mounting

Symmetrical rail 35 mm (EN 60715)
Housing material

Thermoplastic UL94 V-0
Operating temperature
 Tu

-40/+85°C
Protection rating

IP20
Failsafe mode

Short-circuit - transmision cut-off - fault mode 3
Operating indicator

Green / Red
Spare module(s)

DLAMTS-12D3
Remote signaling of disconnection

Yes
Connection bus

SPD connection/control module by bus: bus 1+4 (1control module+4 SPD), bus 1+9, bus 1+24
Dimensions

See diagram

Standards compliance

IEC 61643-21 / EN 61643-21 / UL497B / GBT 18802.21