Type 1+2+3 PV surge protector CTC Technology

DPVN1-6CS-21Y-600
Part Number 65212101
DPVN1-6CS-21Y-600

NEW CITEL PV SPD

  • Combined SPD type 1+2+3
  • CTC-Technology
  • Discharge capacity per pole: Iimp/total= 6.25/12.5 kA (10/350 μs); In/total= 15/60 kA (8/20 μs)
  • Safe disconnecting device
  • Fault-resistant Y-circuit
  • Remote signaling
  • Complies with the IEC 61643-31, EN 61643-31, EN 50539-11, UL1449 ed.5 and UTE C 61-740-51 standards
  • Certified EN 61643-31 and IEC 61643-31
Contact Us
The DPVN1 is CITEL's new series of type 1+2 SPDs for Photovoltaic. Based on CITEL's patented CTC Technology, the DPVN1 incorporates a thermosensitive separation point placed at the center of the SPD guaranteeing the safest disconnection on the market. The products are designed to be mounted on a DIN rail. Compact and equipped with a failure indicator, these products are easy to install and maintain.
SPD type
IEC

1+2+3
Network

PV 500 Vdc
Nominal PV voltage
 Uocstc

500 Vdc
Max. PV operating voltage
 Ucpv

600 Vdc
Residual Current
Leakage current to Ground
 Ipe

< 0.2 mA
PV Permanent Operating current
Current consumption at Ucpv
 Icpv

< 0.1 mA
Follow current
If

None
Nominal discharge current
15 x 8/20 µs impulses
 In

20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax

40 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total

60 kA
Impulse current by pole
max. withstand 10/350µs by pole
 Iimp

6.25 kA
Total lightning current
max. total withstand @ 10/350µs
 Itotal

12.5 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc

6 kV
Current withstand short circuit PV
 Iscpv

15 000 A
Connection mode(s)

+/-/PE
Protection mode(s)

Common/Differential mode
Protection level +/-
@ In (8/20µs)
 Up

2.3 kV
Protection level +/PE (-/PE)
@ In (8/20µs)
 Up

2.3 kV
Technology

MOV
Connection to Network

By screw terminals: 2.5-25mm² (35mm²) / by bus
Format

Compact monobloc box
Plugable

No
Mounting

Symmetrical rail 35 mm (EN 60715)
Housing material

Thermoplastic UL94 V-0
Operating temperature
 Tu

-40/+85°C
Protection rating

IP20
Outdoor application

No
Failsafe mode

All pole disconnection from PV network
Disconnection indicator

1 mechanical indicator - Red/Green
Remote signaling of disconnection

Output on changeover contact
Max. Voltage/Current for remote signaling

250 V / 0.5 A (AC) / 30 V / 3 A (DC)
Dimensions

See diagram - 2.5TE (EN43880)
Weight

0.350 kg
Standards compliance

IEC 61643-31 / EN 61643-31 / EN 50539-11 / UL1449 ed.5
Certification

KEMA
Thermal disconnector

CTC Technology integrated
Back-up protection device

Without