RJ45 surge protector for CAT6A cabling network

MJ8-C6A
Part Number 581540
MJ8-C6A
  • up to 10-Gigabit Ethernet compatible
  • Category 6A compatible
  • RJ45 Shielded connectors
  • Mounted on frame or DIN rail
  • Compliance IEC 61643-21, EN 61643-21
  • Certified UL497B
Contact Us
The MJ8-C6A surge protector is designed to protect data processing equipment, connected to twisted pair Ethernet 10 to 1000 Mbit/s network Featured with in/out RJ45 connectors.
Select another reference:
Network
 10Gigabit Ethernet - Cat 6A cabling specification
Nominal line voltage
 Un 5 Vdc
Max. DC operating voltage
 Uc 8 Vdc
Max. frequency
 f max. 500 MHz
Max. data rate
 10 Gbps
Insertion loss
 < 1 dB
Protection level
@ In (8/20 µs)
 Up L/L 20 V
Impulse current
2 x 10/350µs Test - D1 Category
 Iimp 500 A
Line/Line Nominal discharge current
C2 Category
In L/L 500 A
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
 In L/PE 2000 A
Technology
 GDT+Clamping diode
SPD configuration
 4 pairs+shielded
Connection to Network
 RJ45 shielded connectors Female input/output
Format
 Connector RJ45
Mounting
 Mounting flange,Screw lug, DIN Rail
Accessory(s) provided
 DIN rail adapter, screw, screw nut, earthing plate, countersunk screw, cable shoe
Housing material
 Aluminium
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Failsafe mode
 Short-circuit
Disconnection indicator
 Transmission interrupt - default mode 2
Pinout
 (1-2)(3-6)(4-5)(7-8)
Dimensions
 See diagram
Weight
 0.106 kg
Standards compliance
 IEC 61643-21/ EN 61643-21 / UL497B IEEE 802-3af/3at/3bt/ ANSI/TIA-568-C.1
Certification
 UL 497B