19'' patch panel surge protector for high-speed network
RAK32-POE-B-SO
Part Number: 891105
  • 19'' patch panel surge protector for POE-B
  • 32 ports
  • In/Out front : RJ45
  • Maintenance possible per port
  • Secondary Protection
  • UL497B
Contact Us

The RAK series of rack mount and wall mount standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BaseT Ethernet, Cat5, Cat6, PoE and most other communication interfaces.

Network
 POE mode B, Gigabit Ethernet, POE Plus
Nominal line voltage
 5 Vdc/48 Vdc
Max. DC operating voltage
 Pin 1.2.3.6 : 7.5Vdc - Pin 4.5.7.8 : 60 Vdc
Max. load current
 750 mA
Max. data rate
 1000 Mbps
Max. frequency
 > 100 MHz
Insertion loss
 < 1 dB
Protection level
Following the test category C3 (IEC61643-21) - Line/Line		 20V/80 V
Max. shunt capacitance < 25 pF (ligne ethernet)
Discharge current
at 10/1000µs impulse current		 130 A/50 A
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category 		600 A/250 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category		 600 A/250 A
Technology Diode écrêtage
SPD configuration 32 ports of 8 wires
Connection to Network RJ45 female intput/output
Format
 Rack 19''
Mounting
 19'' rack or wall
Housing material Aluminium
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
 False
Failsafe behavior Short-circuit
Disconnection indicator Transmission interrupt
Spare module(s)
 1-port removable circuit
Remote signaling of disconnection
 no
Pin outs (1-2)(3-6)(4-5)(7-8)
Dimensions
 See diagram
Standards compliance
 IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3at