19'' patch panel surge protector for high-speed network

RAK32-POE-A-SO
Part Number 891104
RAK32-POE-A-SO
  • 19'' patch panel surge protector for POE-A
  • mounting 'stand-alone'
  • 32 ports
  • In/Out front : RJ45 -Maintenance possible per port
  • Secondary Protection
  • Conforme UL497B
Contact Us
The RAK series of rack mount and wall mount standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BaseT Ethernet, Cat5, Cat6, PoE and most other communication interfaces.
Network
 POE mode A, Gigabit Ethernet, POE Plus
Nominal line voltage
 Un 48 Vdc
Max. DC operating voltage
 Uc 60 Vdc
Max. frequency
 f max. 250 MHz
Max. data rate
 10/100/1000 Mbps
Insertion loss
 < 1 dB
Max. load current
@25°C
 IL 750 mA
Protection level
@ In (8/20 µs)
 Up L/L 80 V
Max. capacitance
 C < 25 pF (ligne ethernet)
Discharge current
at 10/1000µs impulse current
 50 A
Line/Line Nominal discharge current
C2 Category
In L/L 250 A
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
 In L/PE 250 A
Technology
 Diode écrêtage
SPD configuration
 32 ports of 8 wires
Connection to Network
 RJ45 Female intput/output
Format
 Rack 19''
Mounting
 19'' rack or wall
Housing material
 Aluminium
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Outdoor application
 No
Failsafe mode
 Short-circuit
Disconnection indicator
 Transmission interrupt
Spare module(s)
 1-port removable circuit
Remote signaling of disconnection
 No
Pinout
 (1-2)(3-6)(4-5)(7-8)
Dimensions
 See diagram
Standards compliance
 IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3at