Ultra Compact Type 3 hard wired surge protector

MSB6-400
Part Number 561302
MSB6-400
  • Compact type 3 surge protector
  • Wall mounting and hard wired connection
  • Status indicators
  • IP20
  • EN 61643-11, IEC 61643-11 and UL1449 ed.5 compliance

MSB6 surge protectors Type 3 are designed for effective protection of sensitive equipment, in addition to the surge protector installation (coordination surge protector). These surge protectors utilize a ultra compact and economica scheme based varistors, to obtain a power flow relevant for secondary protection. The operating condition of the arrester is signaled by buzzer.

Select another reference:

SPD type
IEC

3

Network

230 V single-phase

AC system

TT-TN

Nominal line voltage
Un

230 V

Max. AC operating voltage
Uc

255 Vac

Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
UT

335 Vac withstand

Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
UT

440 Vac disconnection

Operating current
Continious current at Uc
Ic

None

Follow current
If

None

Nominal discharge current
15 x 8/20 µs impulses
In

3 kA

Max. discharge current
max. withstand @ 8/20 µs by pole
Imax

6 kA

Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
Uoc

6 kV

Withstand on overvoltages IEEE C62.41.1

6 kV/6 kA

Protection mode(s)

Common/Differential mode

Protection level L/N
@ In (8/20µs)
Up L/N

1.5 kV

Protection level L/PE
@ In (8/20µs)
Up L/PE

1.5 kV

Admissible short-circuit current
Isccr

3 000 A

Technology

MOV+GDT

Connection to Network

Wires

Mounting

AC outlet or screw terminal

Housing material

Thermoplastic UL94 V-0

Operating temperature
Tu

-40/+85°C

Protection rating

IP20

Failsafe mode

Disconnection from AC network

Disconnection indicator

Buzzer ON

Operating indicator

without

Dimensions

See diagram

Weight

0.02 kg

Standards compliance

IEC 61643-11 / EN 61643-11 / UL1449 ed.5

Certification
Thermal disconnector

Internal

Installation ground fault breaker

Type 'S' or delayed