Surge fuses for protection of Type 1 AC SPD

SFD1-13
Part Number 39466
SFD1-13
  • Specific Fuses (SPD Fusing Disconnectors) for short circuit protection of Type 1 AC surge protectors
  • Surge current withstand: 12.5 kA @ 10/350µs
  • 10 units per packaging
  • Very compact
  • Fusion signaling feature
  • Remote signaling though fuse holder
Contact Us
The SFD range has been especially designed to associated with Type 1 SPDs. These very specific fuses are able to conduct huge surge currents in rather small dimensions to protect Type 1 SPDs against harsh current circuit failures. In order to comply IEC 61643-11 standards, AC power SPD must be protected against short circuit failures: these specific fusing disconnectors msut be installed in the SPD branch. The SFD are equipped with fusing indicator to be used inside holder with remote signalling feature. The SFD disconectors must be used with specific fuse holders which provide : - relevant surge current capability - remote signaling feature - switching (useful for maintenance purpose)
Select another reference:
Max. AC operating voltage
Uc

500 Vac
Nominal discharge current
15 x 8/20 µs impulses
 In

50 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax

80 kA
Impulse current by pole
max. withstand 10/350µs by pole
 Iimp

12.5 kA
Equivalent rated AC current

125 A
Breaking capacity

100 000 A
Fusing indicator

Yes
Remote fusing indication

Through dedicated fuse holder
Residual voltage
 Up

< 0.4 kV @ 12.5 kA
Format

Cylindrical
Mounting

On cylindrical fuse holder
Operating temperature
 Tu

-40/+85°C
Protection rating

IP20
Number of units per package

10 units per packaging
Dimensions

14x51 mm
Associate Fuse holder

BSFD14-10S & SFD1-13 1 pole BSFD14-11S* & SFD1-13 single phase (L+N) BSFD14-20S & SFD1-13 2-phase BSFD14-30S & SFD1-13 3-phase BSFD14-31S* & SFD1-13 3-phase+N BSFD14-40S & SFD1-13 4-phase

*The Neutral position is equipped with a non-fusing element

The fuse holders are all equipped with a remote signaling
Standards compliance

EN 61643-11 /IEC 61643-11 /EN 60269-1/EN 60269-2/IEC 60269-1/IEC 60269-2