1-pair plug-in surge protector

KP1-06DBC
Part Number 159282
KP1-06DBC
  • Surge protector for LSA+ connection strip
  • 1-pair
  • Fast installation with no wiring modification
  • Fast maintenance
  • For analog or high speed telecom lines
Contact Us
These surge protectors are designed to protect telephone equipment connected to the telecom network through a MDF equipped with connection strips. They are compatible with LSA+ connection strip. The mechanical design allows intantaneous installation, without wiring modification, on the connection system and fast maintenance. These products are in compliance with analog or high speed digital telecom networks.
Select another reference:
Network
 MIC/T2, 10BaseT
Nominal line voltage
 Un 6 V
Max. AC operating voltage
Uc 8 Vac
Max. frequency
 f max. > 20 MHz
Insertion loss
 < 1 dB
Max. load current
@25°C
 IL 300 mA
Nominal discharge current
15 x 8/20 µs impulses
 In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 10 kA
Protection mode(s)
 Common/Differential mode
Protection level
@ In (8/20 µs)
 Up L/L 25 V
Protection level L/N
@ In (8/20µs)
 Up L/N 25 V
Protection level L/PE
@ In (8/20µs)
 Up L/PE 25 V
Type of diagram
 M
Technology
 GDT+Clamping diode
SPD configuration
 1 pair
Connection to Network
 LSA+ connector
Format
 1-pair plug-in box
Mounting
 LSA+ connection strip
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Outdoor application
 No
Failsafe mode
 Short-circuit - transmision cut-off - fault mode 2
Disconnection indicator
 Transmission interrupt
Remote signaling of disconnection
 No
Dimensions
 See diagram
Standards compliance
 IEC 61643-21 / EN 61643-21