RJ45 surge protector for POE-B

MJ8-POE-IT
Part Number 581548
  • POE++ compatible (IEEE 802.3bt)
  • 10G compatible from 5m to 100m in the channel, using Cat-6A S/FTP cabling
  • RJ45 Shielded connectors
  • IEC 61643-21, EN 61643-21
  • Indoor application: IP20 rating (NEMA 2)
  • Plastic enclosure, UL94-V0
  • Location and test categories: D1, C2, C3

The MJ8-POE is designed to protect sensitive data-processing equipment connected to a POE (Power over Ethernet) network from transient overvoltages. The MJ8-POE surge protector is deployed in signal network applications with data transmission speeds of 100 and 1000 Mbps. The surge protector is housed in a shielded enclosure with high quality RJ45 shielded jacks. The transient protection circuit is based on high energy gas discharge tubes (GDT) and a network of fast response silicon avalanche diodes (SAD) to achieve sharp clamping of very large surge events.

Select another reference:

Network
POE-B and Gigabit Ethernet, High POE
Nominal line voltage
Un 5 Vdc/48 Vdc
Max. DC operating voltage
Uc 7.5 Vdc (1.2.3.6) - 60 Vdc (4.5.7.8)
Max. frequency
f max. 250 MHz
Max. data rate
10/100/1000 Mbps
Insertion loss
< 1 dB
Protection level
@ In (8/20 µs)
Up L/L 20/70 V
Impulse current
2 x 10/350µs Test - D1 Category
Iimp 500 A
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
In L/PE 2000 A
Technology
GDT+Clamping diode
SPD configuration
8 wires+shielded
Connection to Network
RJ45 shielded connectors Female input/output
Format
Metallic box with connectors input/output
Mounting
Mounting flange,Screw lug, DIN Rail
Accessory(s) provided
DIN rail adapter, screw, screw nut, earthing plate, countersunk screw, cable shoe
Housing material
Aluminium
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Failsafe mode
Short-circuit - transmision cut-off
Pinout
(1-2)(3-6)(4-5)(7-8)
Dimensions
See diagram
Weight
0.115 kg
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497 B / IEEE 802-3ab/3at
Certification
UL 497B