19'' patch panel CAT6 surge protector for Data-Telecom lines
Part Number: 6252
  • 19'' patch panel CAT6 surge protector
  • 48 ports
  • In : connecor type 110 back
  • Out : RJ45 front
  • Maintenance possible per port
  • Secondary protection
  • UL497B

The PCH series protects 12, 24 and 48 ports, 19''rack mounted protection units that feature 110 punchdow to RJ45 connectors. This series feature CAT6 perfomance for todays's high speed data networks. These products are also available in configurations that offer surge protection to Telco and ISDN circuits.

100/1000/10G BaseT, RS422, RS485, RS423, Ethernet
Nominal line voltage
5 Vdc
Max. DC operating voltage
7.5 Vdc
Max. load current
750 mA
Max. data rate
10 Gbps
Max. frequency
250 MHz
Insertion loss
< 1 dB
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
20 V
Max. shunt capacitance < 8 pF
Discharge current
at 10/1000µs impulse current
100 A
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category
500 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category
500 A
Technology Diode écrêtage
SPD configuration 48 ports of 8 wires
Connection to Network Self-stripping connector 110 back/RJ45 female. front
Rack 19''
Baie 19''
Housing material Aluminium
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
Failsafe behavior Short-circuit
Disconnection indicator Transmission interrupt
Spare module(s)
removable circuit 2 ports
Remote signaling of disconnection
Pin outs (1-2)(3-6)(4-5)(7-8)
See diagram
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3an