19'' patch panel surge protector for high-speed network
RAK32-E-C6
Part Number: 891103
  • 19'' patch panel surge protector for CAT6
  • 32 ports
  • In/Out front : RJ45
  • Maintenance possible per port
  • Secondary protection
  • UL497B
Contact Us

The RAK series of rack mount and wall mount standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BaseT Ethernet, Cat5, Cat6, PoE and most other communication interfaces.

Network
 100/1000/10G BaseT, RS422, RS485, RS423, Ethernet
Nominal line voltage
 5 Vdc
Max. DC operating voltage 7.5 Vdc
Max. load current
 750 mA
Max. data rate
 10 Gbps
Max. frequency
 250 MHz
Insertion loss
 < 1 dB
Protection level
@ In (8/20µs)		 20 V
Protection level L/N
@ In (8/20µs)		 20 V
Protection level L/PE
@ In (8/20µs)		 20 V
Max. shunt capacitance < 8 pF
Discharge current
at 10/1000µs impulse current		 100 A
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category 		500 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category		 500 A
 
Technology Diode écrêtage
SPD configuration 32 ports of 8 wires
Connection to Network RJ45 female intput/output
Format Rack 19''
Mounting Baie 19''
Housing material Aluminium
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
 False
Failsafe behavior Short-circuit
Disconnection indicator transmission interrupt
Spare module 1-port removable circuit
Remote signaling of disconnection no
Pin outs (1-2)(3-6)(4-5)(7-8)
Dimensions
 see diagram
Standards compliance IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3an