Compact 1-phase Type 2 (or 3) surge protector - 230 V -Pluggable
DS215-320/G
DS215-320/G
Part Number: 451921
  • Compact single-phase type 2 (or 3) surge protector
  • In : 5 kA
  • Imax : 15 kA
  • Common/Differential mode
  • Pluggable module
  • Remote signaling option
  • EN 61643-11, CEI 61643-11 compliance
  • UL1449 ed.7
Installation Sheet

The DS215 Type 2 surge protectors are compact devices designed to protect single phase networks at the main switchboard. They provide a common or common/differential mode protection.

This SPD is based on high energy varistor equipped with thermal disconnectors and failure indicator to comply with standards. The DS215 is DIN rail compatible and is built with a plug-in module and fixed base, which allows an easy and fast maintenance.



SPD type
following IEC test
2 (ou 3)
Network
230 V single-phase
AC system
TT-TN
Nominal line voltage
230 Vac
Max. AC operating voltage L-N 320 Vac
Max. load current
20 A
Temporary Over Voltage (TOV) Charasteristics - 5 sec.
without disconnection
335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn
without disconnection or with safety disconnection
440 Vac disconnection
Temporary Over Voltage N/PE (TOV HT)
without disconnection or with safety disconnection
1200 V/300A/200 ms withstand
Residual Current
Leakage current to Ground
None
Operating current
Continious current at Uc
0.5 mA
Follow current
None
Nominal discharge current
15 x 8/20 µs impulses
5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
15 kA
Withstand on Combinaison waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
10 kV
Withstand on overvoltages IEEE C62.41.1 10 kV
Admissible short-circuit current 10000 A
Connection mode(s)
L/N and N/PE
Protection mode(s)
Common/Differential mode
Protection level N/PE
@ In (8/20µs)
1.5 kV
Protection level CM/DM
@ In (8/20µs)
1.5/1 kV
Residuel voltage at 5 kA
@ 8/20µs
1.5/1 kV
 
Technology MOV+GDT
SPD configuration Single phase
Connection to Network by screw terminals: 1.5-10mm² (L/N) or 2.5-25mm² (PE)
Format Plug-in modular box
Mounting Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Failsafe behavior Disconnection
Disconnection indicator 1 mechanical indicator
Spare module(s)
DSM215-320/G
Remote signaling of disconnection Option DS215S-320/G : output on changeover contact
Dimensions
See diagram
Certification EAC
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Fuses
Fuses type gG - 20A
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed