DC power surge protector - 95 Vdc
DS210-95DC
DS210-95DC
Part Number: 441001
  • Surge protector for DC supplies
  • 95 Vdc
  • Imax: 6 kA
  • Pluggable module
  • Operating indicator
  • IEC 61643-11, EN 61643-11 and UL1449 ed.4 compliance
Installation Sheet
Contact Us

DS210-DC surge protectors are designed to protect equipment connected to DC (and AC) power supplies from lightning surges. It is based on varistors matched to the network voltage: the varistors have thermal disconnection devices to control any end-of-life. These SPD are DIN rail compatible and is connected in parallel on the line to be protected.

SPD type
following IEC test		 2 (ou 3)
Network
 DC network 95Vdc
Nominal DC voltage
 95 Vdc
Max. AC operating voltage L-N 75 Vac
Max. DC operating voltage 100 Vdc
Max. load current
 20 A
Residual Current
Leakage current to Ground		 < 0.1 mA
Operating current
Continious current at Uc		 < 0.1 mA
PV Permanent Operating current
Current consumption at Ucpv		 < 0.1 mA
Follow current
None
Nominal discharge current
15 x 8/20 µs impulses		 2 kA
Max. discharge current
max. withstand @ 8/20 µs by pole		 6 kA
Total Maximal discharge current
max. total withstand @ 8/20 µs 		6 kA
Current withstand short circuit PV
 1000 A
Connection mode(s)
 +/-/PE
Protection mode(s)
 Common/Differential mode
Protection level
@ In (8/20µs)		 300 V
Protection level L/PE
@ In (8/20µs)		 300 V
 
Technology MOV
SPD configuration 2 poles
Connection to Network By screw terminals: 1.5-10mm² (actives wires) and 2.5-25mm² (ground)
Format Plug-in modular box
Mounting Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
 False
Failsafe behavior disconnection from DC line
Disconnection indicator Green led off
Spare module(s)
 DSM210-95DC
Remote signaling of disconnection -
Dimensions
 See diagram
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Fuses
 Fuses type gG- 10 A
Thermal disconnector internal