RJ11 surge protector for 1 telephone line
MJ6-1T
Part Number: 560402
- Telecom line surge protector
- PSTN or ADSL
- 1-pair
- Instantaneous installation
- RJ11 connector
- UL497A
Installation Sheet
The MJ6-1T surge protector is designed to protect sensitive telecom terminals against lightning surges. They are equipped with standard telecom connection allowing easy and intantaneous maintenance. Compatible with RJ11 connector it protects one PSTN or ADSL line Wall mounting
Select another reference:
| Network |
RTC, ADSL2, SDSL, 1 pair |
| Nominal line voltage |
150 Vdc |
| Max. DC operating voltage |
170 Vdc |
| Max. load current |
300 mA |
| Max. data rate |
30 Mbps |
| Max. frequency |
> 10 MHz |
| Insertion loss |
< 1 dB |
| Protection level @ In (8/20µs) |
220 V |
| Protection level Following the test category C3 (IEC61643-21) - Line/Line |
220 V |
| Protection level L/N @ In (8/20µs) |
220 V |
| Protection level L/PE @ In (8/20µs) |
220 V |
| Max. shunt capacitance | < 70 pF |
| Impulse current 2 x 10/350µs Test - D1 Category |
500 A |
| Line/Line Nominal discharge current 8/20µs Test x 10 - C2 Category |
2500 A |
| Line/Ground Nominal discharge current 8/20µs Test x 10 - C2 Category |
2500 A |
| Technology | GDT+clamping diode |
| SPD configuration | 1-pair + shielded |
| Connection to Network | RJ11 connector female input/output |
| Format |
RJ11 Connector |
| Mounting |
Mounting flange,Screw lug |
| Housing material | Aluminium |
| Operating temperature | -40/+85°C |
| Protection rating | IP20 |
| Outdoor application |
False |
| Failsafe behavior | Short-circuit |
| Disconnection indicator | Transmission interrupt |
| Remote signaling of disconnection |
no |
| Pin outs | 1-pair (3-4) |
| Dimensions |
See diagram |
| Standards compliance |
IEC 61643-21 / EN 61643-21 / UL497A |
