2-pair plug-in surge protector
Part Number: 71192
  • 2-pair plug-in module
  • Optimized modularity and maintenance
  • Can be adapted to all types of line
  • Gas tube /diode combination
  • UL497A
Installation Sheet

The E280 concept is based on the use of plug-in module to protect telecom and data lines. The E280 line covers all multi-line telephone and data installation configurations: there is an E280 module and a suitable support for every type. Each module protects two pairs and is available for all types of line. The plug-in concept makes maintenance easy and lest you mix different types of line on the same support.

Telephone line K20, standard
Nominal line voltage
150 V
Max. DC operating voltage
190 V
Max. load current
150 mA
Max. frequency
> 3 Mhz
Insertion loss
< 1 dB
Max. discharge current
max. withstand @ 8/20 µs by pole
10 kA
Total Maximal discharge current
max. total withstand @ 8/20 µs
20 kA
Line inductance
Protection mode(s)
Common/Differential mode
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
260 V
Max. shunt capacitance < 70 pF
Impulse current
2 x 10/350µs Test - D1 Category
2.5 kA
Nominal discharge current
8/20µs Test x 10 - C2 Category
5 kA
Type of diagram
Technology GDT+Clamping diode
SPD configuration 2 pairs
plug-in modul on support
on support type BN, FPSU, MMP
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
Failsafe behavior Short-circuit - transmision cut-off - fault mode 2
Disconnection indicator Transmission interrupt
Remote signaling of disconnection
See diagram
Standards compliance
IEC 61643-21 / EN 61643-21/UIT rec. K20