Ultra Compact Type 2+3 hard wired surge protector
MLPX1VG-230L-W
MLPX1VG-230L-W
Part Number: 711294
  • Ultra compact Type 2+3 hard wired surge protectors
  • Wall mounting and hard wired connection
  • VG Technology
  • No aging
  • Bracket breakable
  • Protection rating : IP67
  • Disconnection signaling by indicator
  • AC disconnection in case of end of life
  • EN 61643-11, IEC 61643-11 and UL1449 4ed. compliance
Contact Us
SPD type 2+3
Network 230-277 V single-phase
AC system TT/TN
Nominal line voltage Un 230 V
Max. AC operating voltage L-N Uc 320 Vac
Max. load current IL 10 A
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 440 Vac disconnection
Temporary Over Voltage N/PE (TOV HT) UT 1200 V/300A/200 ms disconnection
Residual Current Ipe None
Nominal discharge current In 5 kA
Max. discharge current Imax 10 kA
Total Maximum discharge current Imax Total 20 kA
Withstand on Combination waveform IEC 61643-11 Uoc 10 kV
Withstand on overvoltages IEEE C62.41.1 10 kV / 10 kA
Protection mode(s) Common/Differential mode
Protection level L/N Up L/N 1.5 kV
Protection level L/PE Up L/PE 1.5 kV
Admissible short-circuit current Isccr 10 000 A
Technology VG Technology (MOV+ GSG)
Connection to Network by wires : 1.5 mm² (L/N) and 2.5 mm² (PE)
Mounting Wall or plate
Housing material Thermoplastic UL94-V0
Operating temperature Tu -40/+85°C
Protection rating IP67
Failsafe mode Disconnection and AC line cut-off
Disconnection indicator Led green OFF and AC network cut-off
Voltage/operating indicator Green Led ON
Remote signaling of disconnection No
Dimensions See diagram
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Certification EAC
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed