Surge protector for LED lighting system Class 2

Part Number: 842211
  • Type 2 (or 3) surge protectors for LED
  • For single phase 230 V network
  • Class 2
  • Very compact
  • Plate mounting
  • Spring terminal connection
  • Status indicator
  • End of life : AC Disconnection
  • EN 61643-11, IEC 61643-11 compliance

The MLPM range is a series of AC surge protectors dedicated to LED lighting system. The MLPM are very compact to be integrated into luminaires by spring connexion terminal. This range is equipped with a mechanical disconnect indicator exclusive to CITEL.

Select another reference:

SPD type 2+3
Network 220-240 V single-phase
AC system TT-TN
Max. AC operating voltage Uc 320 Vac
Max. load current IL 10 A
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 440 Vac disconnection
Residual Current Ipe None
Nominal discharge current In 5 kA
Max. discharge current Imax 10 kA
Withstand on Combination waveform IEC 61643-11 Uoc 10 kV
Protection mode(s) Differential Mode
Protection level L/N Up L/N 1.2 kV
Admissible short-circuit current Isccr 10 000 A
Technology MOV+GDT
Connection to Network 2 spring terminals opposite side in/out - wire 1.5 mm² max.
Mounting On plate
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Disconnection and AC line cut-off
Disconnection indicator Red indicator
Voltage/operating indicator Mechanical
Dimensions See diagram
Standards compliance EN 61643-11 / IEC 61643-11
Certification KEMA
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed