Surge protector for LED lighting system Class 1
MLPCH1-230L-V
Part Number: 833221
- Type 2 (or 3) surge protectors for LED
- Optimized coordination with internal MOV of driver
- Very compact
- Plate mounting
- Screw terminal connection
- Status indicator
- Disconnection AC end of life
- IEC 61643-11 and EN 61643-11 compliance
Installation Sheet
The MLPC range is a comprehensive series of AC surge protectors dedicated to LED lighting system. The MLPC are very compact to be integrated into luminaires.
Select another reference:
| SPD type following IEC test |
2+3 |
| Network |
230-277 V single-phase |
| AC system |
TT/TN |
| Nominal line voltage |
230-277 Vac |
| Max. AC operating voltage L-N |
320 Vac |
| Max. load current |
2.5 A |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. without disconnection |
335 Vac withstand |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn without disconnection or with safety disconnection |
440 Vac disconnection |
| Temporary Over Voltage N/PE (TOV HT) without disconnection or with safety disconnection |
1200 V/300A/200 ms disconnection |
| Nominal discharge current 15 x 8/20 µs impulses |
5 kA |
| Max. discharge current max. withstand @ 8/20 µs by pole |
10 kA |
| Total lightning current max. total withstand @ 10/350µs |
20 kA |
| Withstand on Combinaison waveform IEC 61643-11 Class III test: 1.2/50µs - 8/20µs |
10 kV / 5 kA |
| Withstand on overvoltages IEEE C62.41.1 |
10 kV / 10 kA |
| Admissible short-circuit current |
10000 A |
| Protection mode(s) |
Common/Differential mode |
| Protection level L/N @ In (8/20µs) |
1.5 kV |
| Protection level L/PE @ In (8/20µs) |
1.5 kV |
| Protection level CM/DM @ In (8/20µs) |
1.5 kV / 1 kV |
| Technology | MOV+GDT |
| Connection to Network | Screw contact terminal - wire 2.5 mm² max. |
| Mounting |
On plate |
| Housing material | Thermoplastic UL94-V0 |
| Operating temperature | -40/+85°C |
| Protection rating | IP20 |
| Failsafe behavior | Disconnection and AC line cut-off |
| Disconnection indicator | Led green OFF and AC network cut-off |
| Voltage/operating indicator | Green Led ON |
| Dimensions |
See diagram |
| Certification |
EAC |
| Standards compliance |
EN 61643-11 / IEC 61643-11 |
| Installation ground fault breaker | Type 'S' or delayed |
| Thermal disconnector | Internal |
