Compact single-phase type 2 (or 3) surge protector - 230 V - Monobloc
DACN10-L21YG-275
DACN10-L21YG-275
Part Number: 70115021
  • Cost effective single-phase surge protector
  • Type 2+3 monobloc compact
  • In/Imax: 5 kA/10 kA
  • Max. load current: 16A
  • Disconnection + AC line cut
  • 2-port configuration (series mounting)
  • Remote signaling (option)
  • EN 61643-11, IEC 61643-11 compliance

DACN10-L AC surge protector is used for the 'secondary' protection of the single-phase networks against the surge voltages creating by lightning. DS98 is equipped with in-line safety disconnectin and double output connection. The disconnection will be indicate by the turn on of the red led in the front. Very compact, the DS98L surge protector must be installed close by the equipment to protect, downstream a 'primary' surge protector. DACN10-L provides both a common and differential mode protection.

Select another reference:

SPD type 2+3
Network 230 V single-phase
AC system TN
Max. AC operating voltage L-N Uc 275 Vac
Max. load current IL 16 A
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 440 Vac disconnection
Residual Current Ipe None
Nominal discharge current In 5 kA
Max. discharge current Imax 10 kA
Withstand on Combination waveform IEC 61643-11 Uoc 10 kV
Protection level L/N Up L/N 1.3 kV
Protection level N/PE Up N/PE 1.6 kV
Protection level L/PE Up L/PE 1.6 kV
Admissible short-circuit current Isccr 10 000 A
SPD configuration Single phase
Connection to Network by screw terminals: 1.5-10mm²
Mounting Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Disconnection and AC line cut-off
Disconnection indicator Green led OFF
Remote signaling of disconnection option DACN10S-L21YG-275
Dimensions See diagram - 1TE (DIN43880)
Weight 0.0862 kg
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed
Fuses Fuses type gG - 25A