Compact single-phase type 2 (or 3) surge protector - 230 V - Monobloc
DACN10-L11-150
DACN10-L11-150
Part Number: 70112011
  • Cost effective single-phase surge protector
  • Type 2+3 monobloc compact
  • In/Imax: 5 kA/10 kA
  • Max. load current: 16A
  • Disconnection + AC line cut
  • 2-port configuration (series mounting)
  • Remote signaling (option)
  • EN 61643-11, IEC 61643-11 compliance
Contact Us
DACN10-L AC surge protector is used for the 'secondary' protection of the single-phase networks against the surge voltages creating by lightning. DS98 is equipped with in-line safety disconnectin and double output connection. The disconnection will be indicate by the turn on of the red led in the front. Very compact, the DS98L surge protector must be installed close by the equipment to protect, downstream a 'primary' surge protector. DACN10-L provides both a common and differential mode protection.
Select another reference:
SPD type 2+3
Network 120 Vac single-phase
AC system TT-TN
Max. AC operating voltage L-N Uc 150 Vac
Max. load current IL 16 A
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 180 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 230 Vac disconnection
Temporary Over Voltage N/PE (TOV HT) UT 1200 V/300A/200 ms breaker disconnection
Residual Current Ipe None
Nominal discharge current In 5 kA
Max. discharge current Imax 10 kA
Withstand on Combination waveform IEC 61643-11 Uoc 10 kV
Protection level L/N Up L/N 0.7 kV
Protection level N/PE Up N/PE 1.5 kV
Admissible short-circuit current Isccr 10 000 A
SPD configuration Single phase
Connection to Network by screw terminals: 1.5-10mm²
Mounting Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Disconnection and AC line cut-off
Disconnection indicator Green led OFF
Remote signaling of disconnection option DACN10S-L11-150
Dimensions See diagram - 1TE (DIN43880)
Weight 0.0897 kg
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed
Fuses Fuses type gG - 25A