RJ45 surge protector for ISDN network
Part Number: 6375
  • RJ45 Surge protector for Cat.6 network
  • Adaptable on specific rack 19''
  • Mounting on DIN rail

Select another reference:

Nominal line voltage
48 Vdc
Max. DC operating voltage 60 Vdc
Max. load current
750 mA
Max. data rate
40 Mbps
Max. frequency
> 100 MHz
Insertion loss
< 1 dB
Protection level
@ In (8/20µs)
70 V
Protection level L/N
@ In (8/20µs)
70 V
Protection level L/PE
@ In (8/20µs)
70 V
Max. shunt capacitance < 75 pF
Impulse current
2 x 10/350µs Test - D1 Category
Discharge current
at 10/1000µs impulse current
50 A
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category
300 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category
300 A
Technology Diode écrêtage
SPD configuration 8 wires
Connection to Network connector RJ45 female/female
Format Connector RJ45
Mounting DIN rail or specific 19'' rack model: SPDINRAK (p/n 899001)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
Failsafe behavior Short-circuit
Disconnection indicator Transmission interrupt
Remote signaling of disconnection no
Pin outs (1-2)(3-6)(4-5)(7-8)
See diagram
Standards compliance IEC 61643-21 / EN 61643-21 / UL497B