Type 1+2 AC surge protector single-phase
DAC1-13-20-150
DAC1-13-20-150
Part Number: 821710112
  • Type 1 + 2 AC multipolar surge protector
  • In : 20 kA
  • Iimp: 12,5 kA
  • Pluggable module for each phase
  • Remote signaling (option)
  • EN 61643-11, IEC 61643-11 compliance
Installation Sheet

The DAC1-13 is an extreme duty Type 1+2 pluggable SPD designed to protect AC powerline at the main switchboard of an installation equipped with lightning rod.

The technology ‘Multi-varistor” allows a very high discharge current capability in small dimensions and the best possible behavior to the AC network (no follow current).

Despite their high discharge capability, the DAC1-13 surge protectors are especially compact and are available in multipolar versions to protect single or 3-phase AC networks.



SPD type
following IEC test
1+2
Network
120 V single-phase
AC system
TN
Max. AC operating voltage L-N
150 Vac
Temporary Over Voltage (TOV) Charasteristics - 5 sec.
without disconnection
180 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn
without disconnection or with safety disconnection
230 Vac disconnection
Residual Current
Leakage current to Ground
< 1 mA
Follow current
None
Nominal discharge current
15 x 8/20 µs impulses
20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
50 kA
Impulse current by pole
max. withstand 10/350µs by pole
12.5 kA
Total lightning current
max. total withstand @ 10/350µs
25 kA
Withstand on overvoltages IEEE C62.41.1
20 kV
Admissible short-circuit current
50000 A
Protection level L/PE
@ In (8/20µs)
0.9 kV
Protection level N/PE
@ In (8/20µs)
0.9 kV
Specific energy by pole
max. withstand 10/350 µs
40 kJ/ohm
Technology MOV
SPD configuration Single phase
Connection to Network by screw terminals: 2.5-25 mm²
Format
Plug-in modular box
Mounting
Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Failsafe behavior Disconnection
Disconnection indicator 1 mechanical indicator by pole
Spare module(s)
MDAC1-13-150
Remote signaling of disconnection
option DAC1-13S-20-150: output on changeover contact
Dimensions
See diagram
Certification
-
Standards compliance
IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Installation ground fault breaker Type 'S' or delayed
Thermal disconnector Internal
Fuses
Fuses Type gG - 125 A