Power Supply / control module

Part Number: 6414235

The DLATS is a range of pluggable dataline surge protector with remote fault signaling feature which allows the user to detect remotely a faulty surge protector. The product is made with a monitoring module which controls, through a wire bus, the status of the surge protective modules. In case of operation of an internal disconnection mechanism of the one or several surge protective modules, the monitoring module will send the information through the closing of a electrical contact. In the same time, the front LED of the defective surge protective modules, normally green color, will turn red. Thanks to the pluggable construction, the defective module will be easely replace by a new one. One monitoring module, powered by 24 Vdc, could manage up to 24 surge protective modules. The surge protective modules are based of Gas tube and fast clamping diodes association for high discharge capabilty and low clamping level. The end of lile of the SPD will create a line disconnection (Fault Mode 3 following IEC61643-21).

Nominal line voltage Un 24 Vdc
Connection to Network Screw terminal: cross section 0.4-1.5 mm² or spring terminal (DLATS-xxx/R)
Format Plug-in DIN box
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Voltage/operating indicator Green / Red
Remote signaling of disconnection Output on changeover contact
Dimensions See diagram
Weight 0.056 kg
Standards compliance IEC 61643-21 / EN 61643-21 / UL497B / GB 18802.21
Certification EAC