Coaxial surge protector low frequency
CXP25-B/FF
Part Number: 631756
- Coaxial surge protector low frequency
- Imax : 20 kA
- Up to 1 GHz
- Connector BNC

CXP protectors are based on GDT to provide high discharge current capability without destruction. Its particular mounting allows good adaptation to radio and TV system. Typical applications include radio terminals and TV sets (antenna, cable or satellite).
Select another reference:
Network |
coaxial DC-1000 MHz |
Nominal line voltage |
< 100 V |
Max. DC operating voltage |
< 150 V |
Max. load current |
0.5 A |
Max. frequency |
DC-1 GHz |
Insertion loss |
< 1 dB |
Operating current Continious current at Uc |
None |
Max. discharge current max. withstand @ 8/20 µs by pole |
20 kA |
Protection mode(s) |
Common mode |
Protection level @ In (8/20µs) |
< 800 V |
Impulse current 2 x 10/350µs Test - D1 Category |
2.5 kA |
Nominal discharge current 8/20µs Test x 10 - C2 Category |
5 kA |
Impedance |
50 ohms |
Max Power |
190 W |
Return loss |
> 16 dB |
VSWR |
< 1.35:1 |
DC Pass | True |
Insulation resistance |
≥10 GOhms |
Technology | Gas discharge tube |
Connection to Network | Connector BNC Female/Female |
Format |
Metallic box |
Mounting |
On plate |
Housing material | Brass |
Operating temperature | -40/+85°C |
Protection rating | IP20 |
Outdoor application |
False |
Failsafe behavior | Short-circuit |
Disconnection indicator | Transmission interrupt |
Dimensions |
See diagram |
Standards compliance |
IEC 61643-21 / EN 61643-21 / UL497C / UL497E |