Surge protector for RJ line
DIN-T
Part Number: 891710
  • Surge protector for RJ45 line
  • Adaptable on specific rack 19''
  • Mounting on DIN rail


Select another reference:

Network
RS232 - RS485
Nominal line voltage
12 V
Max. DC operating voltage 18 Vdc
Max. load current
750 mA
Max. data rate
100 Mbps
Max. frequency
> 100 MHz
Insertion loss
< 1 dB
Protection level
@ In (8/20µs)
30 V
Protection level L/N
@ In (8/20µs)
30 V
Protection level L/PE
@ In (8/20µs)
30 V
Max. shunt capacitance < 40 pF
Impulse current
2 x 10/350µs Test - D1 Category
-
Discharge current
at 10/1000µs impulse current
60 A
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category
300 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category
300 A
 
Technology Diode écrêtage
SPD configuration 8 wires
Connection to Network connector RJ45 female/female
Format Connector RJ45
Mounting DIN rail or specific 19'' rack (P/N SPDINRAK)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
False
Failsafe behavior Short-circuit
Disconnection indicator transmission interrupt
Remote signaling of disconnection no
Pin outs (1-2)(3-6)(4-5)(7-8)
Dimensions
see diagram
Standards compliance IEC 61643-21 / EN 61643-21 / UL497B