surge protector for POE-B network
DIN-POE-B
Part Number: 891709
  • Surge protector for POE-B network
  • Adaptable on specific rack 19''
  • Mounting on DIN rail


Select another reference:

Network
POE-B, Gigabit Ethernet, POE Plus
Nominal line voltage
5 Vdc /48 Vdc
Max. DC operating voltage
Pin 1.2.3.4 : 7.5 Vdc / Pin 5.6.7.8 : 60 Vdc
Max. load current
750 mA
Max. data rate
1000 Mbps
Max. frequency
> 100 MHz
Insertion loss
< 1 dB
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
20 V / 80 V
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category
600 A / 250 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category
600 A / 250 A
Technology Diode écrêtage
SPD configuration 8 wires
Connection to Network connector RJ45 female/female
Format
Connector RJ45
Mounting
DIN rail or specific 19'' rack model: SPDINRAK (p/n 899001)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
False
Failsafe behavior Short-circuit
Disconnection indicator Transmission interrupt
Remote signaling of disconnection
no
Pin outs (1-2)(3-6)(4-5)(7-8)
Dimensions
See diagram
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3at