Surge protector for telephone line
DIN-G
DIN-G
Part Number: 6374
  • Surge protector for RJ45 line
  • Adaptable on specific rack 19''
  • Mounting on DIN rail


Select another reference:

Network
RTC, ADSL2+, 4 pairs
Nominal line voltage
150 Vdc
Max. DC operating voltage
240 Vdc
Max. load current
750 mA
Max. data rate
40 Mbps
Max. frequency
> 100 MHz
Insertion loss
< 1 dB
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
300 V
Max. shunt capacitance < 95 pF
Discharge current
at 10/1000µs impulse current
75 A
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category
400 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category
400 A
Technology Diode écrêtage
SPD configuration 8 wires
Connection to Network connector RJ45 female/female
Format
Connector RJ45
Mounting
DIN rail or specific 19'' rack (P/N SPDINRAK)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
False
Failsafe behavior Short-circuit
Disconnection indicator Transmission interrupt
Remote signaling of disconnection
no
Pin outs (1-2)(3-6)(4-5)(7-8)
Dimensions
See diagram
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497B