RJ45 surge protector for cat.6 network
DIN-E-C6
Part Number: 6236
- RJ45 Surge protector for Cat.6 network
- Adaptable on specific rack 19''
- Mounting on DIN rail
Datasheet| Network |
10Gigabit Ethernet, Cat.6 cabling |
| Nominal line voltage |
5 Vdc |
| Max. DC operating voltage |
7.5 Vdc |
| Max. load current |
750 mA |
| Max. data rate |
1000 Mbps |
| Max. frequency |
> 250 MHz |
| Insertion loss |
< 1 dB |
| Protection level Following the test category C3 (IEC61643-21) - Line/Line |
20 V |
| Max. shunt capacitance | < 40 pF |
| Discharge current at 10/1000µs impulse current |
100 A |
| Line/Line Nominal discharge current 8/20µs Test x 10 - C2 Category |
500 A |
| Line/Ground Nominal discharge current 8/20µs Test x 10 - C2 Category |
500 A |
| Technology | Diode écrêtage |
| SPD configuration | 8 wires |
| Connection to Network | connector RJ45 female/female |
| Format |
Connector RJ45 |
| Mounting |
DIN rail or specific 19'' SPDINRAK (p/n 899001) |
| Housing material | Thermoplastic UL94-V0 |
| Operating temperature | -40/+85°C |
| Protection rating | IP20 |
| Outdoor application |
False |
| Failsafe behavior | Short-circuit |
| Disconnection indicator | Transmission interrupt |
| Remote signaling of disconnection |
no |
| Pin outs | (1-2)(3-6)(4-5)(7-8) |
| Dimensions |
See diagram |
| Standards compliance |
IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3an |
