RJ45 surge protector for CAT5E network
MJ8-CAT5E
Part Number: 560201
- CAT5 networks surge protector
- 10/100/1000BaseT compatible
- RJ45 connector
- Shielded enclosure
- Bi-directional
Installation Sheet
The MJ8-CAT5E surge protector is designed to protect data processing equipment, connected to twisted pair Ethernet 10 to 1000 Mbit/s network Featured with in/out shielded RJ45 connectors.
| Network |
Gigabit Ethernet, Cat.5E cabling |
| Nominal line voltage |
5 Vdc |
| Max. DC operating voltage |
8 Vdc |
| Max. load current |
1000 mA |
| Max. data rate |
1000 Mbps |
| Max. frequency |
> 100 MHz |
| Insertion loss |
< 1 dB |
| Protection level Following the test category C3 (IEC61643-21) - Line/Line |
20 V |
| Max. shunt capacitance | < 25 pF |
| Impulse current 2 x 10/350µs Test - D1 Category |
500 A |
| Line/Line Nominal discharge current 8/20µs Test x 10 - C2 Category |
500 A |
| Line/Ground Nominal discharge current 8/20µs Test x 10 - C2 Category |
2000 A |
| Technology | GDT+clamping diode |
| SPD configuration | 4 pairs + shielded |
| Connection to Network | RJ45 shielded connectors female input/output |
| Format |
Connector RJ45 |
| Mounting |
Mounting flange,Screw lug, DIN Rail |
| Housing material | Aluminium |
| Operating temperature | -40/+85°C |
| Protection rating | IP20 |
| Failsafe behavior | Short-circuit |
| Disconnection indicator | Transmission interrupt |
| Pin outs | (1-2)(3-6)(4-5)(7-8) |
| Dimensions |
See diagram |
| Standards compliance |
IEC 61643-21 / EN 61643-21 / UL497 B / IEEE 802-3ab |
