RJ45 surge protector for CAT6 network

Part Number: 6184
  • CAT6 networks surge protector
  • 10/100/1000BaseT compatible
  • RJ45 connector
  • Bi-directional

The MJ8-C6 surge protector is designed to protect data processing equipment, connected to twisted pair Ethernet 10 to 1000 Mbit/s network Featured with in/out RJ45 connectors.

Select another reference:

Network 10 Gigabit Ethernet, Cat.6 cabling
Nominal line voltage Un 5 Vdc
Max. DC operating voltage Uc 6 Vdc
Max. frequency f max. > 250 MHz
Max. data rate 10 Gbps
Insertion loss < 1 dB
Max. load current IL 1000 mA
Protection level Up 20 V
Max. capacitance C < 25 pF
Impulse current Iimp 100 A
Line/Line Nominal discharge current In L/L 100 A
Line/Ground Nominal discharge current In L/PE 100 A
Technology Diode écrêtage
SPD configuration 4 pairs
Connection to Network RJ45 connector Female input/output
Format Connector RJ45
Mounting Mounting flange,Screw lug, DIN Rail
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Short-circuit
Disconnection indicator Transmission interrupt
Pinout (1-2)(3-6)(4-5)(7-8)
Dimensions See diagram
Standards compliance IEC 61643-21 / EN 61643-21 / IEEE 802-3an