Coordination inductor
DSH100
DSH100
Part Number: 465100
  • Coordination inductors for surge protectors
  • For use with the DS series
  • 100 A

These coordination inductors are specially designed to control the implementation of the primary and secondary levels of SPD surge protectors. They are necessary where the coordination cannot be accomplished using the 'natural' inductance of the active conductors (in particular in a small volume, where the length of line wire between primary SPD and secondary SPD is lower than 10m), DSH inductors are DIN rail compatible and are connected in series on the line to be protected and depend on the maximum line current.

Select another reference:

Max. AC operating voltage L-N Uc 500 Vac
Max. load current IL 100 A
Connection to Network screw terminals: 4-50mm²
Format 1-pole modular box
Mounting Symmetrical rail 35 mm (DIN 60715)
Housing material Thermoplastic UL94-V0
Operating temperature Tu -40/+85°C
Protection rating IP20
Wiring mode 1 DSH in series on each active wire
Dimensions See diagram